About Pulveriser
INTRODUCTION
Fine Pulverizer is suitable for fine grinding powder. Fine Pulverizes ( Screen less equipment ) are precisely built for grinding of soft to medium hard materials into amazingly fine powder.
Built-in water circulation jacket retains grinding temperature lower than otherwise, permitting handling of some heat sensitive applications. Design permits ease of cleaning & quick change over of products, thus savings through a minimum of downtime. Feed is controlled via screw feeder. The air swept product passes through a complex grinding contour where attrition force combined with turbo (jet) effect ensures ultra fine particle size. The annular gap plate controls the flow of material through the Mill.
The powder is discharged at the bottom opening, for collection. Various options available to meet users need.
WORKING PRINCIPAL
Raw material to be pulverised enters the crushing chamber through the hopper and automatic rotary feeder. The impact of the hammer on the feed material against the Liner plates reduces it into fine powder. The ground material is carried towards the whizzer classifier for classification and the over size particles are rejected by the classifier and returns to the crushing chamber for further grinding. The classified material is then conveyed into the cyclone for collection and bagging. A dust collector is provided in the system for ensuring dust Free operation and no loss of ground powder.
Pulveriser
The Pulverisers meet most capacity requirements and lend themselves to a wide degree of adjustments with fineness of the finished product ranging from about 60 mesh to bulk passing through 325 mesh, depending on a considerable extent to the particular material being handled. Unlike an ordinary hammer mill, it has no screens to break, wear out or clog in the crushing chamber.
Features
- Easy starting.
- Cold & silent running
- Dust free operations
- Robust Construction
- Low Specific Power Consumption
- Automatic Feeding
- Durable Long Life
- Guaranteed Grinding Efficiency
TECHNICAL SPECIFICATIONS
| Mill Category | Screen Less |
| Model Type | UFM – 300 to UFM – 400 |
| Mill Motor Horse Power(H.P.) | 10 to 20 |
| Capacity (Range) kgs/hr/operation | 50 to 300 |
| Max. Permissible Feed size(mm) | 6 to 6 |
| Fineness range | 200 to 400 mesh BSS & Finer |
| Abrasiveness & Hardness handled | Medium & up to 3 on Moh’s Scale |
Call us anytime
+91 93748 84807
Call us anytime
+91 93748 84807
Pulveriser
The Pulverisers meet most capacity requirements and lend themselves to a wide degree of adjustments with fineness of the finished product ranging from about 60 mesh to bulk passing through 325 mesh, depending on a considerable extent to the particular material being handled. Unlike an ordinary hammer mill, it has no screens to break, wear out or clog in the crushing chamber.
Features
- Easy starting.
- Cold & silent running
- Dust free operations
- Robust Construction
- Low Specific Power Consumption
- Automatic Feeding
- Durable Long Life
- Guaranteed Grinding Efficiency
TECHNICAL SPECIFICATIONS
| Mill Category | Screen Less |
| Model Type | UFM – 300 to UFM – 400 |
| Mill Motor Horse Power(H.P.) | 10 to 20 |
| Capacity (Range) kgs/hr/operation | 50 to 300 |
| Max. Permissible Feed size(mm) | 6 to 6 |
| Fineness range | 200 to 400 mesh BSS & Finer |
| Abrasiveness & Hardness handled | Medium & up to 3 on Moh’s Scale |